Onyx

The ONYX has a large diameter and stout appearance which makes this bird a natural for sport flying. A single G motor can propel this vehicle to 1800 ft. Parachute recovery.

Recovery System: Parachute recovery

 Recommended motors: D12-3, E30-7, F50-9 or a G40-10

Dia.:

3.10"

Height:

25.2"

Weight:

13 oz

MMT:

29mm

Chute

chute

Tristar

The Tristar is an exciting new design that features a 3 - 29mm engine cluster. Like all LOC Precision rocket kits, the Tristar is an exciting kit to fly.

Recommended motors:  

Dia.:

3.10"

Height:

50"

Weight:

MMT:

3 - 29mm

Chute

chute

Forte

The FORTE is a sleek four-finned model that has a single 29mm motor mount. It performs beautifully on a variety of different F and G class motors. Impressive flights to over 1500 ft. can be reached using a G motor. This fine kit features a  pre-slotted airframe / fin construction

Recommended motors: F50-6, G40-7

Dia.:

3.10"

Height:

45.2"

Weight:

20 oz

MMT:

29mm

Chute

28" chute

Shadow Hawk

Shown here finished as a Sandia Sandhawk

History of the Sandhawk

The Sandhawk motor was developed for Sandia primarily for use in multi-stage rockets launched in support of Atomic Energy Agency activities. It was however flown as a single-stage vehicle in initial tests of the motor and some subsequent scientific missions.

Recommended motors for the model kit include: H, I and J impulse.

Dia.:

3"

Height:

82"

Weight:

60 oz

MMT:

38mm

Chute

36"

Tweed B

Shown here finished as a Black Brant X

History of the  Black Brant X

Black Brant is a solid propellant rocket system in single and multistage configurations that can carry payloads of 70-850kg to altitudes from 150km to more than 1500km. It provides up to 20 minutes of useful time for micro-gravity experiments, auroral studies, deep space observations, and other extraterrestrial research. Since 1962, more than 800 Black Brants have been launched, with a vehicle success rate of 98%.

Recommended motors for the model kit are G and H impulse.

Dia.:

3"

Height:

82"

Weight:

60 oz

MMT:

38mm

Chute

36"

4 - 29SS

The 4-29SS continues LOC's tradition of fine rockets designed for clusters. This special rocket can be flown on two or four motors usuing combinations of D, E F and G motors. Put in a couple of G's and enjoy an H impulse powered flight.

Recommended Motors: 4xD12-7,4E,2F,2G cluster

Dia.:

3.10"

Height:

61.25"

Weight:

29 oz

MMT:

4 - 29mm

Chute

28" chute

Stovi

 The STOVI is Debbie's own innovative design for SINGLE and inexpensive 24mm, G42 powered flights approaching 1000 ft. This unique six finned model with six external "booster tanks" is designed around LOC's BT-3.00 and LOC's exclusive airframe reducer AR-3.00-2.14. Special features include a sturdy fin wedge attachment.- 28" parachute
 
Recommended Motors:  24mm F and G's

Dia.:

3.10" to 2.26"

Height:

44.5"

Weight:

22 oz

MMT:

24mm

Chute

28" chute

Norad

The NORAD is LOC's first concept of a tactical surface-to-air missile. Designed around LOC's BT-3.00 airframe tubing , this kit features LOC's exclusive airframe reducer AR-3.00-2.14. A single 29mm motor can propel this four finned beauty to 1500 ft. altitudes. The Norad features pre slotted airframe / fin construction.

Recommended Motors:  F and G impulse

Dia.:

3.10"

Height:

38.25"

Weight:

20 oz

MMT:

29mm

Chute

28" chute

Norad Pro Maxx

The is another of LOC Precision's kits suggested by Max Baines. It also features their exclusive  BT-3.00 and LOC's airframe reducer, AR-3.00-2.14. With a 38mm motor mount, this rocket can be built to fligh on more motors than we could possibly list. With precision crafted parts and fins that attach to the motor mount tube, a heavy duty parachute, this has proven to be a very popular kit.

Recommended Motors:  G, H, I and J impulse.

Dia.:

3.10" - 2.26"

Height:

48.25"

Weight:

26 oz

MMT:

38mm

Chute

36" chute

Cyclotron

The Cyclotron is a member of LOC Precision's ISP Performance Series which represent a wide spectrum of power usage that is available in H to K class motors. Each kit comes complete with nylon elastic shock cord, plastic nose cone, heavy-duty nylon chute, thick-walled airframe tubing, precision machined plywood centering rings and tubular fins. The Cyclotron is based on the 3" airframe and is reduced to 2" with LOC Precision's exclusive airframe reducer.

Recommended Motors: 

Dia.:

3.10" to 2.14"

Height:

56.75"

Weight:

35 oz

MMT:

38mm

Chute

chute

Caliber ISP

The CALIBER ISP is a single, 54mm motor-powered vehicle that redefines performance and takes it to the edge! Powered by a J90, altitudes to over 7500 ft. can be achieved. This four-finned model is optimum designed to give you the best in high altitude flights on a variety of motors. This exciting kit features pre-slotted airframe / fin construction, payload section and  heavy-duty LOC Precision parachute 

Recommended Motors: G80-4, H70-6, J90-10

Dia.:

3.10"

Height:

59.25"

Weight:

29 oz

MMT:

54mm

Chute

36" chute

HYPERLOC 300 dual deploy 

 For the lovers of hybrid motors. The Hyperloc 300 was specially designed for the longer motors normally associated with hybrid flying. This awesome design is loaded with extras! Electronics bay, main and drogue cutes, pre-sloted airframe, payload section are some of the features you will enjoy with this rocket. At 74" tall, it is definitely a rocket that people will notice.
Recommended Motors: I, J, K 38mm and 54mm hybrid motors, H, I, J solid motors.

Recommended Motors:  I, J, K 38mm and 54mm Hybrid motors and  H, I, J Solid motors

* Motor mount adapters needed for some motors not included. 

Dia.:

3.10"

Height:

60.25"

Weight:

48 oz

MMT:

54mm

Chute

18" drogue & 36" chute

Lil Dieter 

A New kit by LOC Precision which include factory pre-slotted airframe and through-the-wall fin construction. The Lil DITER is a slightly smaller version of our famous EXPEDITER kit that performs beautifully on a variety of different F and G motors through Level 1 H motors.  Lil DITER is a sure to be an attention getter at your next launch Parachute Recovery.

Recommended Motors: F,G and H 29mm and 38mm motors.

* Motor mount adapters needed for 2 motors not included. 

Dia.:

3.10"

Height:

47"

Weight:

21 oz

MMT:

54mm

Chute

28"